Lower, Axle Link Mounts, for 1.25" Heims 5/8" Bolt Hole 10 Degrees Welded
This is our Universal Axle Link Mount Tab Kit. We offer this link mount in 10 degrees or 20 degrees. You can purchase it either welded or unwelded for those DIY fabricators that want to save some money.
The tabs are laser cut out of .25" steel and cut for 3.375" Tube but will work on axle tube diameters from 3 1/8" to 3 1/2".
The bolt hole size is 9/16" but could easily be drilled out to a larger size if necessary. The inside width is 2.625 for large 1.25" heims.
In the unwelded kit, you will receive one smaller tab, one larger tab and two caps so the link mount will be completely boxed for the most strength. By using two different size tabs this makes the link mount lean off the axle tube at an angle.
If you purchase the link mount from us as a welded item then all you have to do is put it on your axle and weld it on.
MADE IN THE USA!
- Item Requires Shipping
- 1.0 lbs.
Total Reviews (0)
Write the First Review!
You must login to post a review.