Click on image to zoom

YJ Steering Box Mount HD, 1"

PSB8795K
Was: $149.99
Sale: $127.49
Save: 15%
Save: $22.50
Qty:

Description

This heavy duty steering box mount is designed to fit 87-95 Jeep YJ. The mount is fabricated from 1/2" steel. This mount moves the steering box 1" forward and bolts into the factory holes in the frame.

In many high-steer applications with spring over and shackle reversal, there is an interference problem with the pitman arm hitting the tie-rod. This happens when the drivers side tire flexes up, and can occur due to a few different reasons. Many shackle reversal kits move the front axle forward a small amount. Also, some high-steer arms are longer, and require a longer pitman arm to achieve full steering. This causes interference between the two.

If you use our forged 2" tall high-steer arms, a stock YJ/TJ 5.5" long pitman arm, and keep the axle in the factory location, you will not need the steering box mount. However, if you are even thinking about a shackle reversal, and moving the axle forward an inch or two, the box mount is a great start to your project.

If you are running an aftermarket bumper, be sure there is room to move the steering gear 1" forward.

 

 

Details

  • PSB8795K
  • PSB8795K
  • WFO Concepts
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 10.0 lbs.