Custom 1.25"x.219 Wall DOM Tie Rod 7/8x18 Threads
We can build you a custom DOM tie rod to your specs - up to 5' long!
We build these tie rods from 1.25"x.219 wall (.812" I.D.) DOM tubing.
We build them on the lathe and drill and tap each end to 7/8"-18 threads. The threads are 2" deep with right hand threads on one side and left hand threads on the other side. After we are done drilling and tapping the tubes, we mill wrench flats on each end for easy adjustment. All tie rods are built and shipped within two business days.
After you place your online order, send an e-mail to firstname.lastname@example.org with your dimensions (see below)!
You will need to email us:
- Measurement from hole to hole (center to center)
- Give us the part numbers of the tie rod ends you will be using with this tie rod and we will do the math to figure out how long your bar needs to be.
- If you're using something other than Moog Tie Rod ends, also include the measurements of your tie rod ends. Measure from center of zerk fitting to end of threads.
Please call us if you have any questions.
MADE IN THE USA!
- Item Requires Shipping
- 10.0 lbs.
Total Reviews (0)
Write the First Review!
You must login to post a review.