Chevy Shackle Flip Kit, 73-87 1/2 & 3/4 Ton, w/ 6" Shackles and G8 Bolts for shackles
Shackle flip kit for 1973-1987 1/2 ton and 3/4 ton Chevy trucks. This shackle flip kit can give you 5.5" of lift with 6" shackles. This kit will allow you to lift the rear of your truck, without sacrificing the ride quality, or payload capability. It also helps stop axle wrap by eliminating the need for rear blocks when lifting your truck. These brackets can also be used with lift springs, in order to achieve a taller lift.
The installation of this kit requires the use of some basic tools. You will need to be able to support the rear of the truck with a lift or jack stands while you remove the old shackle hangers. Simply grind, chisel, or plasma cut the old rivets off your stock hangers. Chase the rivet holes in your frame with a 7/16" drill bit. Then bolt the new hanger onto the truck with the supplied hardware. Kit comes in raw steel form. Please paint before installation.
- (2) shackle hangers (Bare Steel)
- (2) sets of 6" shackles
- (4) bushings, two inner sleeves
- (8) 7/16" Grade 8 bolts, washers and nylocks to attach the hanger to the frame of the truck.
- (4) 9/16" Grade 8 bolts, washer and nylocks to mount the shackles
MADE IN THE USA!
Item added to your shopping cart.
Item added to your wishlist.