2005+ Ford Super Duty 2” x .25” DOM Tie Rod with 1.25” Heims

This is a heavy duty tie rod upgrade for your 2005+ Ford Super Duty axles!

The tie rod is made from 2” OD x ¼” thick walled DOM with large 1¼” heims and 1” Grade 8 bolts. Bent to clear the stock differential cover as well as most aftermarket differential covers. This kit is also supplied with two ¼” spacers to space the 1¼” heims off of the knuckle so you won’t bind your steering from lock to lock.

Stop dragging your stock tie rod on rocks and relocate it, gaining you an additional 3-1/4" of clearance!

*** You will need to relocate your draglink to a higher steering arm mount if running this tie rod. This does not have provisions to mount your draglink. ***

*** This kit is intended for you to drill out the tapered hole in your knuckles to a 1” hole. ***

*** Always double check to see if you have enough clearance to raise your tie rod up. If running a standard steering box with a drop pitman arm, you might experience interference. ***

Kit Includes:
WFO 2005+ FSD Tie Rod Tube for 1-1/4" Heims (qty 1)
XMR16 - 1.25" x 1.0" RH Male Heim Joint (qty 1)
XML16 - 1.25" x 1.0" LH Male Heim Joint (qty 1)
Jam Nut - 1.25"-12, Right Hand Thread (qty 1)
Jam Nut - 1.25"-12, Left Hand Thread (qty 1)
WFO 5402 - Straight Heim Spacer, 1" Bolt Hole x 1/4" Thick (qty 2)
Bolt - 1"-8 x 5", Grade 8 (qty 2)
Washer - 1" SAE Grade 8 (qty 2)
Nylock Nut - 1", Grade 8 (qty 2)