|
|
|
|
 |
 |
|
D44001FPR. Ford Dana 44, right and left hand pair of flat-top steering knuckles, 4 hole, 5 bolt spindle. Ford never made a factory 1/2 ton, dana 44, flat top knuckle. However, from 1975 to 1979, all 3/4 ton Ford 44 front axles had flat top knuckles with 5 bolt spindles. If you try to use the 3/4 ton knuckles with half ton brakes and outers, it won't fit. Due to the lack of steering options for the 1/2 tons, Reid Racing built these replacement knuckles that will fit both the 1/2 ton and 3/4 ton Ford 44's. These knuckle are "Made in the USA", and are cast thicker and stronger than factory knuckles. The top is cast flat and milled, drilled, and tapped for 4 hole steering arms. (3 hole steering arms will still work fine) The new knuckles also have dual steering stops.
The factory ford 1/2 ton 44 knuckle was cast with a few different tie-rod tapers and tie-rod location. Due to this, we suggest buying these knuckles in pairs to ensure that the right and left sides match properly. |
| WARNING: These knuckles will only work with Ford 5 bolt spindles and outers. |
|
Related Products |
%20(9)%2075x75.jpg) |
| WFO 1214D |
| Dana 44 1" Tall High Steer Arm-Long, Dedenbear 4'th Hole |
 |
|
|
%20(11)%2075x75.jpg) |
| WFO 1212D |
| Dana 44 1" Tall High Steer Arm-Short, Dedenbear 4'th Hole |
|
|
|
|
|
 |
|