Weld On Disk Brake Bracket, 8 Lug, Pair
Weld on disc brake brackets. These brackets are designed to weld onto rear axle housings for rear disc brake conversions. The brackets are made from 3/8" steel, and are cut at a height to use 8 lug rotors on a 3.125" tube. They will work on other tube sizes with a little grinding. They fit the standard Chevy front calipers that everybody uses. ('72-'87 Chevy 1/2 ton and 3/4 ton 4x4) These brackets are sold in pairs.
For ease of alignment for welding, clamp these brackets to your rotor with a 3/4" spacer between the two. Install the caliper pins without the caliper. Keep the caliper pins just off the top of the rotor. Do not allow more than 1/8" gap between the caliper bolt and the top of the rotor (two pennies can work good for a gauge). Once the mount is aligned, simply weld it on!
- Item Requires Shipping
- 73.0 lbs.
- W15.0000” x H8.0000” x L108.0000”