Upper Truss Link Mounts for 7/8" heims
These brackets are designed to be welded onto the top of a truss for your upper link mounts. They can be used on a Front or a Rear Truss. These brackets accept a 7/8” heim and have a 5/8” bolt hole.
They start out as a three side bracket that is laser cut and formed out of ¼” thick steel then we welded a small cap on the bottom of it to make it a four sided bracket for extra strength. The brackets are offered in 0, 10 and 20 degree angles.
All you need to do is set it on the truss and weld it in place!
MADE IN THE USA!
- Item Requires Shipping
- 73.0 lbs.
- W15.0000” x H8.0000” x L108.0000”