Inside Frame Link Mount for 1.25" Heim
These link mounts work great for the upper link mount on front 3 link setups.
The mount welds to the inside of the frame, and has a 2.625" wide opening so you can run a 1.25" Heim. You can choose to have it with a 9/16" or a 5/8" bolt hole.
We use this with 1.25" heim joints with 1" to 9/16" misalignment spacers. It is fully welded inside and out with 1/4" laser cut P&O steel.
Available in 0, 10, or 20 degree offset from the mounting surface.
MADE IN THE USA!
- Item Requires Shipping
- 73.0 lbs.
- W15.0000” x H8.0000” x L108.0000”