These link mount brackets are designed for 1.25" heims with a 5/8" bolt hole. The inside diamter is 2.63". The brackets are designed to be welded on the top of a truss for your upper link mounts. Typically, these are used on a rear truss but could also be used on a front truss.
The brackets are formed at a 10 degree angle so you will receive two opposing brackets. However, if you needed a little bit more of an angle you could easily trim them to fit your application. By being individual brackets you can easily set your spread where you want it.
They are CNC plasma cut out of 1/4" P&O Plate then welded together. They are 4 sided for additional strength and weld surface.
All you need to do is set them on the truss and weld them in place!
Sold as a pair.
MADE IN THE USA!