close search

Universal FSD Radius Arm kit with WELDED Clevis and Heim Joints

$685.00
Qty:
WFO UNV-FSD-LINKS-HEIM KIT-WELDED
Your Name:

Email address:

Message:

This is our Universal, Super Duty D60 Front Radius Arm Kit with Welded Clevis ends and Heim Joints.

This kit will make it easy for you to swap a '05+ Super Duty D60 Front Axle under your vehicle. 

What makes this kit Universal is the DOM is slightly long so you can cut it to length if needed.  On this Welded Kit, the axle side clevis ends are welded on the DOM but the frame end is unwelded so you can cut it to length then all you need to do is weld on the tube insert.  

The lower links from the axle mount bolt hole to end of DOM are 45" long.

The upper links from the axle mount bolt hole to the end of the DOM are 27.75" long. 

Kit Contains:

  • (2) Lower links made out of 2" x .250 DOM  with welded on clevis ends
  • (2) Large 1.25"-12 Hex Tube inserts, Right hand thread
  • (2) 1.25" Right hand Heim Joints plus jam nuts
  • (4) 1" x .625" Misalignment spacers
  • (2) 5/8" x 4.5" Grade 8 bolts, washers and nylocks
  • (2) Under the Frame Link Mounts with a 5/8" hole
  • (2) Upper links made out of 1.75" x .250 DOM with welded on clevis ends
  • (4) Torque arm tabs with 3/4" holes
  • (2) 7/8" x 3/4" Right hand heim joints plus jam nuts
  • (2) 7/8"-14 Hex tube inserts, Right hand thread
  • (2) 3/4" x 3" Grade 8 bolts, washers and nylocks

 

MADE IN THE USA!

 

RELATED PRODUCTS

Item added to your shopping cart.
Item added to your wishlist.