close search

HD Chevy Shackle Flip, '00-'10, with 6" Shackles

Your Name:

Email address:


Shackle flip kit for 1999-2010 Chevy HD trucks.  This shackle flip kit can give you 5.5" of lift with 6" shackles.  This kit will allow you to lift the rear of your truck, without sacrificing the ride quality, or payload capability.  It also helps stop axle wrap by eliminating the need for rear blocks when lifting your truck.  These brackets can also be used with lift springs, in order to achieve a taller lift.

The installation of this kit requires the use of some basic tools.  You will need to be able to support the rear of the truck with a lift or jack stands while you remove the old shackle hangers.   Simply grind, chisel, or plasma cut the old rivets off your stock hangers.  Chase the rivet holes in your frame with a 7/16" drill bit.  Then bolt the new hanger onto the truck with the supplied hardware.  Kit comes in raw steel form.  Please paint before installation.

Kit includes:  2 shackle hangers, 2 sets of 3/8" shackles of your choice, 4 bushings, two sleeves, and the bolts to attach the hanger to the frame of the truck.  You will need to re-use your existing shackle bolts.

WARNING: These shackle flip kits will change the pinion angle at least 6 degrees. Depending on your driveline angle, you may need to install shims to achieve the correct pinion angle.


Leaf Spring Axle Relocation Plates

Leaf Spring Axle Relocation Plates

WFO 1700-2.5-KIT
Price: $49.00
Learn More
Item added to your shopping cart.
Item added to your wishlist.