GM HD 2000-2010 3" SAS Kit Pitman Arm

This is the pitman arm we use in our 2000-2010 GM HD 3" Straight Axle Swap Kit.

We take a no hole, flat pitman arm and drill a tie rod taper hole from the bottom up at 6.25" out. Then, for clearance purposes, we cut off the excess of the pitman arm and round the end to make it look smooth and complete.

PLEASE NOTE:  Prior to 9-20-22, we used this same pitman arm in our GM HD 3" Straight Axle Swap Kit BUT it was drilled out with a bottom up draglink taper. If you need to replace the pitman arm for one of the kits built before 9-20-22, please call to order. We will specially make one for the same price. 530-268-9494.