2500/3500 Chevy Shackle Flip, 2000-10
Shackle flip kit for 2000-2010 Chevy HD 2500/3500 truck.
Does not fit 1500HD models. Use WFO SF-C0110-KIT
This shackle flip kit can give you 5" of lift with 5" shackles, and 5.5" of lift with 6" shackles. This kit will allow you to lift the rear of your truck, without sacrificing the ride quality, or payload capability. It also helps stop axle wrap by eliminating the need for rear blocks when lifting your truck. These brackets can also be used with lift springs, in order to achieve a taller lift.
The installation of this kit requires the use of some basic tools. You will need to be able to support the rear of the truck with a lift or jack stands while you remove the old shackle hangers. Simply grind, chisel, or plasma cut the old rivets off your stock hangers. Chase the rivet holes in your frame with a 7/16" drill bit. Then bolt the new hanger onto the truck with the supplied hardware. Kit comes in raw steel form. Please paint before installation.
- (2) Shackle Hangers (Bare steel)
- (8) 7/16" grade 8 bolts, washers and nylocks to attach the hanger to the frame of the truck
- (4) 1/2" grade 8 bolts, washers and nylocks to attach underneath the frame of the truck
- (2) sets of 3/8" shackles of your choice
- (4) bushings and two inner sleeves
- (4) 9/16" x 5" Grade 8 shackle bolts, washers and nylocks (not pictured)
MADE IN THE USA!
WARNING: These shackle flip kits will change the pinion angle at least 6 degrees. Depending on your driveline angle, you may need to install shims to achieve the correct pinion angle.
Item added to your shopping cart.
Item added to your wishlist.