14 bolt Single Wheel, Bolt-On
These 14 bolt disc brake brackets are pretty straight forward. They are CNC Laser cut from 3/8" mild steel and bent so there is no need for spacers.
They bolt onto the existing backing plate flange using the original bolts. They fit 73-87 single wheel 14 bolts, 3/4 ton or 1 ton (non ribbed housings) They are designed to use standard chevy 1/2 ton or 3/4 ton front calipers. These calipers were found on the front of every Chevy 4x4 from 1972 to 1987. The offset of the caliper mount is also designed to work with Chevy 3/4 ton front rotors from the same year as above. Most Napa auto parts carry these rotors under the part number of 5014R.
The brackets are in three different part numbers to fit both single wheel, and dual rear wheel 14 bolt axles as well as dual rear wheel outer hubs on a single rear wheel housing.
NOTE: Fits 73-87 single rear wheel full float 14 bolt housings. Requires steel wheel 15" with a maximum 4" back spacing
WARNING: Some of the different brands of Chevy rotors may not have a large enough countersink in the back of them for the stud to completely seat. It this happens to you, you can have the stud heads turned down, or grind them down to fit. These brackets will NOT fit late model (88 and newer) ribbed housing 14 bolt rear axles.
Item added to your shopping cart.
Item added to your wishlist.