This is a "bat wing" style, rear upper link mount designed to be incorporated with a rear axle truss to help minimize the height above the axle.
They are laser cut from 1/4" steel plate. They are designed to be used with 1.25" heim joints and high misalignment spacers (9/16" or 5/8" through hole). Check out the related items below to set it up. If you're using Johnny Joints, Rubicon Express Super Joints, or some other type, check the link mount width and height below to be sure that they will work.
These are sold unfinished (bare steel) and welded together. Heim joints are not included and must be purchased separately.
Link mount width - 2 5/8"
Link mount height - 3.25"
Bolt size - 9/16" or 5/8"
Overall height - 3 3/4"
Overall width - 11.5"
30 degrees of separation
WARNING: Heim joints are not included.