Dana 60 Kingpin Standard Double Arm Set

WFO 1120	Arms Only	$225.00	Qty

WFO 1120-kit	Arms, 8 ARP studs/nuts, 2 caps	$299.99	Qty

WFO 1120-1kit	Arms, 4 ARP studs/nuts	$250.00	Qty

WFO 1120. Dana 60 Standard Double Arms

These steering arms are designed for custom steering applications where it is necessary to move the tie-rod to the rear of the axle. This is often necessary on such vehicles as Chevy trucks and Jeeps where the steering box location has not been moved forward. In these applications, interference can occur using a standard “high-steer” setup. If the steering box is not far enough forward, the tie-rod will come up and hit the pitman arm when the suspension cycles up. Some applications where these arms fit great are: Jeep CJ, Jeep YJ, 73-87 Chevy, or Toyota mini truck.

These arms fit kingpin style Dana 60 front axles. They are designed to slip over the existing sheet metal kingpin caps. They are also designed to be held down with studs and tapered nuts. We do NOT suggest using bolts. If your axle already has 4 studs and tapered nuts holding the factory drivers side steering arm down, you may re-use those. In that case, you will only need to purchase one stud kit for the passenger side.

The tie-rod holes are tapered to fit large Chevy tie-rod ends. (ES2234R, ES2233L, ES2010L, ES2010R, EX2234R, EX2234L) The drag link hole is tapered to fit large, double pivot, Chevy drag link ends. (ES2026R, ES2027L, ES2027R). A 10 degree angle is machined into the end of the arms to correct for kingpin inclination.

Remember, you will need two factory sheet metal kingpin caps. Be sure to purchase an extra cap if you are removing a factory steering arm on the drivers side.

WARNING: Warning! This is a custom setup! The arms will fit both high pinion and low pinion applications. However, they may interfere with some factory shock locations, as well as aftermarket, deep dish, oil pans. If your front leaf springs are arched 8” or more, the tie-rod may not clear the leaf springs. Please call or e-mail with any other questions.