WFO Heavy Duty Torque arm kits
WFO Torque arms are now available in kit form! Torque arms are a necessity on almost all spring over applications. Not only will a torque arm stop axle wrap, but it can also serve as driveline protection when installed properly. Our torque arms are fully adjustible for whatever pinion angle you are running, and can be adjusted whenever ride height changes. They are engineered to allow the axle to flex without binding, while still preventing the axle from wrapping. Below are the torque arm kits that we have available.
These kits come UNWELDED! You will need to weld the torque arm brackets to the axle, as well as the tube inserts into the tubes. The tubing will come notched on one end where you will weld it to the bushing sleeve. You will cut the other end to length before welding in the tube inserts.
Many applications also require a cross-member or reinforced belly pan to weld the chassis end of the torque arm to. Be sure that you have a secure place to mount the chassis portion. If the shackle end is welded to some stock stamped cross-members, the cross-member will not last long!